LC Tank Circuit Calculator: RF Tuning & Filtering

tank circuit
resonant frequency
rf circuit
tuning filtering
calculator

A Radio Frequency (RF) tank circuit is a fundamental component used in RF electronic circuits for tuning and filtering purposes. It consists of inductors (L) and capacitors (C) arranged in a specific configuration to resonate at a particular frequency.

Explore the tank circuit calculator and learn about LC tank circuit basics and its resonant frequency formula. In an RF tank circuit, the inductor and capacitor are often connected in parallel or in series. The RF signal to be tuned or filtered is applied to this tank circuit. When the frequency of the input signal matches the resonant frequency of the tank circuit, the circuit becomes highly reactive, and the impedance of the tank circuit becomes maximum. This means the circuit will absorb maximum energy from the input signal at that frequency.

LC Tank Circuit Examples

Inputs

Outputs

Here are a couple of examples demonstrating how the LC tank circuit calculator works:

EXAMPLE #1:

  • INPUTS:
    • L = 10e-3 Henrys (i.e. 10nH)
    • C = 100e-6 Farads (i.e. 100 µF)
  • OUTPUT:
    • Tank circuit resonance frequency (Fr) = 0.0001591 MHz or 159.1Hz

EXAMPLE #2:

  • INPUTS:
    • L = 100 Henrys
    • C = 10 Farads
  • OUTPUT:
    • Fr = 5.03e-9 Hz
    • Fr = 0.00503 Hz

Applications of RF Tank Circuits

RF tank circuits have numerous applications, including:

  • Tuning Circuit: RF tank circuits are used in tuning circuits of radios, televisions, and transmitters. By adjusting the values of the inductor or capacitor, the resonant frequency of the tank circuit can be changed, allowing different frequencies to be tuned.

  • Filtering: RF tank circuits can be used as bandpass or band-stop filters in RF systems, allowing specific frequencies to pass through while attenuating others.

Resonant Frequency Formula for LC Tank Circuits

When an inductor and a capacitor are connected in parallel or in series, they form a resonant circuit. This resonant circuit can store energy at a specific frequency. The resonance frequency is determined by the values of the inductor and capacitor.

The following resonant frequency formula is used in this calculator to calculate the resonance frequency of an LC tank circuit:

RF tank circuit frequency resonance formula

In the equation:

  • ‘Fr’ is the resonant frequency in Hertz (Hz).
  • ‘L’ is the inductance in Henry (H).
  • ‘C’ is the capacitance in Farad (F).
  • ‘pi’ is a mathematical constant (Approximately 3.14159)

Conclusion

Overall, RF tank circuits play a crucial role in RF circuit design, enabling tuning and filtering of signals at specific frequencies. They are essential components in various RF systems, including communication devices, transmitters, receivers, and antennas.

There are other types of tank circuits in electronics, each serving different purposes. The popular among them are audio tank circuit, Tesla Coil tank circuit, MRI (Magnetic Resonance Imaging) tank circuit, LC oscillator tank circuit, LC filter tank circuit, and RLC tank circuit.

Air-Filled Circular Cavity Resonator Calculator

Air-Filled Circular Cavity Resonator Calculator

Calculate the resonant frequency, unloaded quality factor, and half-power bandwidth of an air-filled circular cavity resonator for the TM 010 mode.

cavity resonator
resonant frequency
quality factor
3dB and 6dB Attenuator Circuit Design

3dB and 6dB Attenuator Circuit Design

Explore 3dB and 6dB attenuator circuit designs using Pi and T configurations with resistor values. Learn about impedance matching and signal level adjustment in RF circuits.

rf circuit
attenuator
impedance matching
PIN Diode RF Switch and Attenuator Design

PIN Diode RF Switch and Attenuator Design

Explore PIN diode characteristics and circuit designs for RF switches and attenuators. Learn how PIN diodes are used to control RF power in microwave circuits.

rf switch
pin diode
attenuator