RF Phase Shifter: Selection Guide, Applications & Manufacturers
Advertisement
Introduction
RF phase shifters are essential components used to control the signal phase in communication systems, radar applications, and beamforming technologies. Key parameters to consider when selecting an RF phase shifter include its phase range, insertion loss, and control method.
What is an RF Phase Trimmer or Shifter?
An RF phase shifter, also known as an RF phase trimmer, is a device that shifts the phase of an input signal.
Selection Parameters for RF Phase Shifter
- Phase Shift Range: Determines the extent of phase adjustment required (e.g., 0 to 360 degrees or discrete steps such as 90 or 180 degrees).
- Frequency Range: The shifter must support the desired operating frequency range of the application.
- Insertion Loss: Should be as minimal as possible to preserve signal strength.
- Phase Resolution: Higher resolution allows for finer phase control, improving system performance in beamforming and signal processing applications.
- Control Type: Can be analog, digital, or voltage-controlled, depending on the required precision and integration needs.
- Other Parameters: Include power handling capability, linearity, and noise figure, all of which impact overall performance.
Applications of RF Phase Shifter
- Phased Array Antennas: Widely used in radar, 5G, and satellite communication systems for beamforming and directional signal control.
- Wireless Communication Systems: Employed in MIMO (Multiple-Input Multiple-Output) systems, beam steering, and adaptive antenna systems for efficient data transmission.
- Radar & Defense Electronics: Enhances target detection and tracking capabilities in both military and automotive radar applications.
- Test & Measurement Equipment: Integrated into RF signal analyzers and vector network analyzers for precise phase control and calibration purposes.
- Microwave and Millimeter Wave Systems: Utilized in high-frequency applications such as 6G research, satellite links, and microwave imaging.
Manufacturers of RF Phase Shifter
The following table lists prominent manufacturers or vendors of RF Phase Trimmers or Shifters:
RF Phase Trimmer Manufacturers | Description |
---|---|
RLC Electronics | Manufactures and delivers RF phase trimmers ranging from DC to 50GHz. Achieves a nominal phase shift of approximately 1.2 degrees/GHz/Turn at 50 GHz (with 7 turns). E-mail: sales@rlcelectronics.com |
Pasternack Enterprises Inc. | Manufactures adjustable phase trimmers covering the DC to 18 GHz frequency range. Offers adjustment capabilities of about 10 degrees per GHz. E-mail: sales@pasternack.com |
L-3 Narda-ATM (Formerly Advanced Technical Materials Inc.) | Offers fixed RF Phase shifters for various phase shifts (e.g., 30, 40, 60, 90, 180, and 360 degrees). Various models are available from DC to 40 GHz. Website: www.atmmicrowave.com |
Centric RF | Provides models supporting 0 to 2.3 GHz and 0 to 18.6 GHz frequency ranges with a phase shift of 60 degrees per GHz. Offers SMA Coaxial type RF Phase Trimmers supporting 0 to 18 GHz and phase shifts up to 270 Degrees. E-mail: sales@centricrf.com |
Cobham (Now Aeroflex) | Supports RF frequencies from 1GHz to 18 GHz. Phase of the signal is varied by adjusting a screw. |
Fairview Microwave | Offers adjustable RF phase trimmers with adjustable phase angles such as 3.5 deg/GHz, 10 deg/GHz, and 30 deg/GHz. Supports RF frequencies from DC to 18 GHz and up to 40 GHz. Email: sales@fairviewmicrowave.com |
Federal Custom Cable | Provides Phase Trimmers from DC to 18 GHz with SMA-type connectors. |
API Technologies | Offers RF phase shifters operating from DC to 40 GHz. |
JYEBAO Co., Ltd. Taiwan | Provides various phase adjustable phase trimmers (up to 350 MHz, 10 GHz, 12 GHz, and 18 GHz). |
dBD Communications | Offers various types of phase trimmers, including models for 18 GHz to 26 GHz and 18 GHz to 40 GHz. Email: SALES@DBDCOMMUNICATIONS.CO.UK |
Radiall | Offers SMA-type phase shifters operating from 0 to 18 GHz. |
Conclusion
A well-chosen RF phase shifter significantly enhances signal processing capabilities. Selecting from reputable manufacturers ensures reliable and consistent performance.