Vendors » IoT Companies » Vendors of M2M IoT Products

Vendors of M2M IoT Products

m2m iot vendors wireless communication

This page lists vendors of M2M IoT products and provides some basic resources. The core purpose of both IoT (Internet of Things) and M2M (Machine-to-Machine) is the same: machine-to-machine communication and enabling machines to communicate via the internet.

IoT essentially makes devices intelligent, allowing them to function as internet-enabled devices.

For this technology to succeed, all wireless compliant devices based on WLAN, Bluetooth, Zigbee, GSM, and LTE standards must support M2M/IoT protocol stacks. This is crucial for long-term interoperability between devices from different manufacturers utilizing different technologies.

The following table presents some popular M2M IoT products from leading manufacturers/vendors:

CompanyM2M IoT SolutionDescription
Texas Instruments (TI)CC3100 wireless network processor based on WiFiThis “internet on a chip” supports a web server and TCP/IP stack. It supports any bit MCU over UART/SPI interface with a driver.
TICC3200 IoT chipsetThis wireless MCU houses an ARM Cortex M4 device that runs at 80MHz. Supported peripherals include camera, I2S, I2C, SD/MMC, UART, SPI, and a 4-channel ADC. It houses embedded TLS/SSL and TCP/IP stacks, and an HTTP server.
Redpine SignalsLite-Fi RS9110 IoT chipsetSupports 1 antenna along with 802.11n and STBC feature. Host interfaces such as SDIO, SPI, EBI, I2C, SPI, GPIO, and UART are supported. Supports encryption engines WEP, TKIP, and AES on hardware.
Redpine SignalsM2M Combo RS9113Supports TCP/IP stack and host interfaces such as USB2.0, SDIO, SPI, and UART. It supports WLAN 11n, Bluetooth 4.0, and Zigbee on a single chip.
Sequans CommunicationColibiri LTE platform IoT chipIdeal for adding LTE functionality to M2M IoT devices. Supports FDD and TDD. Supports LTE channel having bandwidth of 20MHz. Supports Voice Over LTE, location-based services, and Linux, Windows, Android, and MAC Operating Systems.
GemaltoCinterion board used for M2M-based design solutionsThis kit has an EHS6 Java module and can be interfaced with Arduino sensor boards. The M2M module provides a 2G/3G cellular interface.