WLAN Reassociation Request and Response Frames
Advertisement
In a WLAN network, the reassociation request frame is used by mobile stations in these scenarios:
- Moving from one basic service area to another within the same extended service area.
- Leaving the Wi-Fi network coverage area and returning to the same area.
The re-association request frame includes the address of the WLAN station’s current AP. This information helps the new AP contact the old AP and transfer all the association data. This transfer includes frames buffered with the old AP.
WLAN Reassociation Response Frame
The reassociation response fields are the same as in an association response frame.
Related WLAN and Wireless Communication Topics
- What is the Difference between FIR filter Vs. IIR filter
- Difference between FDM and OFDM
- Difference between SC-FDMA and OFDM
- Difference between SISO and MIMO
- Difference between TDD and FDD
- Difference between 802.11 standards viz.11-a,11-b,11-g and 11-n
- OFDM vs OFDMA
- CDMA vs GSM
- Bluetooth vs zigbee
WLAN MAC Frames Links
- WLAN Association Request and response frame
- WLAN authentication Request and deauthentication frame
- WLAN beacon frame
- WLAN passive vs active scanning frame
- WLAN Probe Request and response frame
- WLAN reassociation Request and response frame
- WLAN RTS and CTS frame
Other Standard MAC Layer Protocols
- WIMAX MAC PROTOCOL
- WLAN MAC LAYER PROTOCOL PART1
- WLAN MAC LAYER PROTOCOL PART2
- ZIGBEE MAC LAYER FRAME
- BLUETOOTH MAC LAYER
- 802.11AC MAC LAYER