RF Radiation: Safety, Uses & Health Concerns

rf radiation
electromagnetic radiation
health hazard
safety standard
radio frequency

RF radiation is a type of non-ionizing electromagnetic energy widely used in communication systems. Radio frequency waves range from 3 KHz to about 300 GHz.

RF radiation happens due to electrical oscillations of the E and H field. This emission of radio frequency waves (Electromagnetic waves) from various transmission devices is referred to as RF radiation.

This guide explains its applications and safety concerns. An antenna is the device used to radiate RF energy in the form of E-M waves in the air when antenna impedance becomes equal to the free space impedance (377 Ohm).

Figure shows electromagnetic rf radiations from mobile and Cellular tower.

RF radiation RF radiation

HERP (Hazards of Electromagnetic Radiation to Personnel)

There are numerous applications of microwave signals in medical treatment for the human body. However, exposure of high microwave power to human bodies is hazardous and will cause skin cancer, headaches, dizziness, cataracts, birth defects in newborns, increased stress, and more diseases.

HERP, i.e., Hazards of Electromagnetic Radiation to Personnel, is caused by the thermal effect of radiated RF/Microwave energy. Microwave energy directed on the body may be scattered, reflected, and absorbed depending upon the field strength, frequency, and dimension of the human body.

The absorbed microwave energy produces molecular vibration and converts this energy into heat. This is also referred to as microwave heating.

Significant energy absorption will occur when body size is at least 110\frac{1}{10}th of the wavelength of microwave frequency radiated. λ_significant=cf\lambda\_{significant} = \frac{c}{f} where cc is speed of light and ff is the frequency.

RF Radiation Hazard Limits

Various agencies have defined safety limits/standards for RF radiation exposure. IRPA (International Radiation Protection Association) sets the permissible exposure levels for the general public. The limits take care of skin depth and specific absorption rate. ANSI developed the electromagnetic hazard limit of HERP.

Various countries such as USSR, CANADA, US, and Sweden have their exposure standards which define the exposure limit with application duration and radio frequency. As per the US Navy, personnel should not be exposed to a power density above 10 mW/cm², for a duration of 0.1 hours and a frequency range of 10 MHz - 100 GHz.

This limit goes to 100 mW/cm² when the exposure is not continuous.

Conclusion

While RF radiation is generally safe, understanding its applications and adhering to safety guidelines ensures responsible usage.

RF Interview Questions and Answers: Academic FAQ

A collection of frequently asked questions (FAQs) related to Radio Frequency (RF) engineering, useful for interview preparation and viva sessions.

rf engineering
interview question
radio frequency
5G OTA Testing Basics and Solutions

5G OTA Testing Basics and Solutions

Explore the fundamentals of Over-The-Air (OTA) testing for 5G NR, including requirements, test methods, and Rohde & Schwarz solutions for accurate and efficient measurements.

5g
ota testing
radio frequency
FSK Modulation: Types and Applications

FSK Modulation: Types and Applications

Explore Frequency Shift Keying (FSK) modulation, its types (BFSK, MFSK, CPFSK), and diverse applications in communication systems. Learn about its benefits for reliable data transmission.

fsk modulation
communication system
data transmission