Battery Life Calculator and Calculation Example

Battery life calculations typically involve estimating the amount of time a battery can power a device based on its capacity and the device’s power consumption. Follow the steps mentioned below to calculate battery life.

• Determine the battery capacity of your device. This information is usually available in the device specifications or manual.
• Measure or estimate the power consumption of your device. You can use tools like a wattmeter to measure the actual power consumption or refer to the device specifications for typical power usage.
• Enter an efficiency parameter as desired.
• Once you have both the battery capacity and device power consumption, plug them into the calculator to calculate the estimated battery life.

Example for Battery Life Calculation

INPUTS:

• Battery Capacity (mAh) = 2000
• Device current consumption (mA) = 100
• Efficiency Factor = 0.9

OUTPUTS:

• Battery Life = 18 Hours

Battery Life Calculation Formula

The following parameters are used in the formula to calculate battery life:

• Battery Capacity: This is the total charge stored in the battery, typically measured in milliampere-hours (mAh) or ampere-hours (Ah).
• Device Current Consumption: This represents the average current drawn by the device during operation, typically measured in milliamperes (mA) or amperes (A).
• Efficiency Factor: This accounts for losses due to inefficiencies in the battery and power conversion circuitry. A value less than 1 represents that some energy is lost in the process.

Conclusion

It’s important to note that this battery life calculator provides an estimate of battery life under ideal conditions and may not account for factors such as battery aging, temperature variations, and variations in device power consumption during different operating modes. Therefore, actual battery life may vary in real-world scenarios.